Hama 2-Way SAT Splitter, fully shielded

00044126

Designed to redistribute satellite/cable TV signals between several receivers

60.90 RON

Quality based on German standards

From the initial sample to series maturity: our products undergo strict and comprehensive quality controls, managed and carried out in Germany. This enables us to guarantee compliance with all specifications, guidelines and standards – and satisfy the strictest demands.

Highlights

Full metal housing

Solid full metal housing for protection against outside interference

Fully shielded

Fully shielded lines for optimal reduction of electromagnetic interference

Technical Specs

Connectivity (Connection)

Input F Socket

Isolation (min.) 20 dB

Number of Outputs 2

Output F Socket

Electrospecific Properties

Frequency Range 5 Mhz - 2400 Mhz

Impedance 75 Ω

Transmission Loss 5 dB +/- 2 dB

Energy

Max. Remote Supply Current 500 mA
More product information
- Designed to redistribute satellite/cable TV signals between several receivers
- Allows the connection of two devices
- DC throughput to all outputs
- Ideal for HDTV
What's in the Box
- 1 SAT splitter
Note for Consumers

Only one receiver each can be used in case of SAT connection. In case of cable connection you can watch different programmes on all receivers.
Manufacturer information
Hama GmbH & Co KG, 86652, Monheim, https://hama.com

Connectivity (Connection)
Input	F Socket
Isolation (min.)	20 dB
Number of Outputs	2
Output	F Socket

Electrospecific Properties
Frequency Range	5 Mhz - 2400 Mhz
Impedance	75 Ω
Transmission Loss	5 dB +/- 2 dB

Energy
Max. Remote Supply Current	500 mA

FAQs

I have connected two televisions via the SAT splitter but can only use one device. When both TVs are switched on simultaneously I cannot see a programme on none of them.

As for satellite television the programmes are transmitted via four different reception levels (LV, LH, HV, HH). The reception unit in the TV transmits signals to the LNB (14/18 V, 0/22 kHz) on the roof via the antenna cable. This works, however, only when a television operates. So you can only receive programmes with one of the two TVs that are connected to the SAT splitter. For operating several TVs on a SAT system, each television must have its own connection to the LNB (twin-, quadswitch, octo LNB) or multi-switch of the system.