Hama FULLMOTION TV Wall Bracket, 3 Stars, 66 cm (26"), 2 arms, black
For the installation of flat screen TVs with a screen size from 25 to 66 cm (10" to 26")
Quality based on German standards
Highlights
Easy-Fix system
Quick and easy to position every time: with just one action, you can orientate the TV spontaneously to match your needs - without any tools at all
Cable manager
Cable manager provides organisation and necessary strain relief
-
Technical Specs
Design (Colour, Pattern, Motif, Series) Colour Black Shade of colour Black Quality Quality 3 Stars Physical Properties Additional Functions Cablemanager Hole Size Attachment Up to M6 Material Steel Plate Maximum Load Capacity 25 kg Maximum swivel range 180 ° Model TV number of joints 3 Projection maximum 40.1 cm Projection minimum 5.1 cm Rotation 6 ° Tilt +/- 10 / 15 ° Size & Weight External Dimension (Height) 22.6 cm External Dimension (Width) 12.2 cm Mounting Plate (Length) 8,6 cm Mounting Plate (Width) 19.8 cm Screen Dimensions 66 cm (26") VESA (from-to) 75x75 - 100x100 VESA Standard 75 x 75, 100 x 100 Field of Application Recommended Maximum Screen Size 66 cm (26") Recommended Minimum Screen Size 25 cm (10") Recommended Screen Size 25 - 66 cm (10" - 26") Suitable for TV Version Swivelling/Tilting -
More product information
- For the installation of flat screen TVs with a screen size from 25 to 66 cm (10" to 26")
- Especially suited for ultra flat televisions, allows optimal positioning of the flat screen TV in any room
- Also suitable for Amazon Echo Show 15
- Supports all VESA standards up to 100 x 100
- Up to +10/-15° continuous tilt
- Pivotable up to 180° on 3 hinges
-
What's in the Box
- 1 FULLMOTION TV wall bracket
- Mounting hardware
- 1 installation instructions
-
Note for Consumers
In addition to the various installation accessories delivered in the package, we also recommend the following tools: drill, pencil, screwdriver, power screwdriver, measuring tape, open-end spanner, spirit level.
The dowels and screws supplied with this TV wall bracket are only suitable for concrete and solid brick walls. Please check your wall before commencing installation. If the wall is made of any other material, please find suitable plugs and screws from a specialist retailer.
To be able to use the full range of motion, route the cable to the fully extended TV wall bracket and ensure that there is sufficient room for the cable to move. -
Manufacturer information
Hama GmbH & Co KG, 86652, Monheim, https://hama.com
FAQs
-
How do I adjust the tilt angle?
To adjust the tilt angle, open the fastening screws at the side, set the required tilt, and then secure the screws in place again.
-
How can I correct the position of the TV after installation?
To compensate any slightly skewed TV, loosen the screw connections on the longitudinal holes on the side nearest the wall. If you have enough play on the wall-side mounting element, move it into a horizontal position with the aid of an external spirit level. Then re-tighten the screw connections.
-
Can I also attach my curved TV to the wall bracket?
Yes, the spacers included allow even TVs with a curved back to be hung effortlessly
-
How do I change the position of the flat screen TV using the rotation setting?
Loosen the corresponding fastening screws and set the desired rotation. Then tighten the screw connection only so far that you can still adjust the TV by hand - i.e. do not tighten it completely. After releasing, the flat screen TV should then remain in the position you selected. This ensures that you can make minor changes to the position of the TV set at any time without using tools.
