More product information

• Gentle cleaning foam, especially suited for the sensitive surfaces of flat panel displays
• Removes dust, dirt and grease
• Free from components such as alcohol, butyl glycol and methanol
• Regular cleaning maintains the device´s service life
• Also suitable for LED/OLED
• Also suitable for the cleaning and care of plastic surfaces, glass, metal, etc.
• Microfibre cleaning cloth (80% polyester, 20% polyamide), 20x20 cm

What's in the Box

• 1 cleaning and care foam
• 1 microfibre cleaning cloth
• 1 instruction manual

Note for Consumers

Check and comply with the device manufacturer´s instructions before cleaning. Test the cleaner on an inconspicuous part to ensure material compatibility before applying to larger areas.

Before cleaning, ensure that your device is switched off and has cooled down (if necessary disconnect the plug) to avoid smear formation.
Only clean the device at room temperature.

Shake well before use.
Only use the cleaner upright.
Escaping liquid gas can cause freezing / material damage.

Apply the cleaner to a lint-free cloth. Avoid applying the cleaner directly to the device so that no fluid can penetrate the interior of the device and possibly damage it.
Do not exert too much pressure on the surface to avoid particles of dust causing scratches. Distribute the cleaner on the screen with the cloth and then rub the screen dry with a dry part of the microfibre cloth. This first releases the dirt and then wipes it away together with the cleaner.

Dispose of the cleaner in accordance with local regulations.